Conferences

Conferences (215)

Conference awards

  1. K. Jung, B. J. Lee, J. Lee, “Non-Destructive Measurement for the Shape and Position of Embedded Cavity Structures Using Reflection Analysis”, 2024 Fall conference of Micro Nano Systems, Busan, Korea (November 21~22, 2024).
  2. T. Kim, J. Lee, “Real-time inspection of semiconductor self-assembly process during high-temperature annealing”, 2024 Fall conference of Micro Nano Systems, Busan, Korea (November 21~22, 2024).
  3. T. Kim, J. Lee, “Selective self-assembly of silicon nano-structures using localized laser annealing”, 2024 Fall conference of Korean Society of Mechanical Engineering, Jeju, Korea (November 6-8, 2024).
  4. J. Ko, J. Lee, “Design and fabrication of silicon self-assembled channel resonators with integrated piezoresistive readout”, 2024 Fall conference of Korean Society of Mechanical Engineering, Jeju, Korea (November 6-8, 2024).
  5. T. Kim, M. Choi, B. J. Lee and J. Lee, “Development of microfluidic platform for refractive index measurement of liquid”, IEEE Sensors 2024, Kobe, Japan (October 20-23, 2024).
  6. J. Ko, J. Lee, “Hot microtube flowmetry with heater-integrated microchannel resonators”, IEEE Sensors 2024, Kobe, Japan (October 20-23, 2024).
  7. K. Jung, J. Lee, “Facile extraction of scanning probe shape towards deconvolution of tip-sample interaction artifact”, Spring conference of Korean Society of Mechanical Engineering – Micro/Nano division, Gyeongju, Korea (May 15-18, 2024).
  8. T. Kim, J. Lee “Top-down fabrication of highly uniform single crystal silicon micro-/nanoparticles via wafer-scale solid jet transfer harvesting”, The 26th Korean MEMS Conference, Jeju, Korea (Mar 27-29, 2024).
  9. J. Ko, J. Lee “Compositional analysis of liquid mixtures by thermo/mechano spectroscopy of heated microfluidic resonators”, The 26th Korean MEMS Conference, Jeju, Korea (Mar 27-29, 2024).
  10. S. Roh, J. Kim, K. Sim, J. Sim, J. Lee, Y. Nam “Measuring the initial stage of dropwise condensation using atomic force microscopy”, 2023 Fall conference of Korean Society of Mechanical Engineering, Incheon, Korea (November 1-3, 2023).
  11. K. Jung, J. Lee, “Local heating and temperature measurement on silicon wafer using two lasers”, 2023 Fall conference of Korean Society of Mechanical Engineering, Incheon, Korea (November 1-3, 2023).
  12. T. Kim, J. Ko, M. Choi, J. Song, B. J. Lee, J. Lee, “Wafer scale ferromagnetic shadow mask for versatile microfabrication”, 2023 Fall conference of Korean Society of Mechanical Engineering, Incheon, Korea (November 1-3, 2023).
  13. J. Ko, J. Lee, “Thermophysical and rheological properties measurements of ultra-small volume liquid mixtures with heater-integrated fluidic resonators”, 2023 Fall conference of Korean Society of Mechanical Engineering, Incheon, Korea (November 1-3, 2023).
  14. T. Kim, M. Choi, B. J. Lee, J. Lee, “Self-assembled silicon cavity with polydimethysiloxane interface for liquid refractive index measurements via near-infrared interferometry”, The 14th Japan-China-Korea Joint Conference on MEMS/NEMS (JCK MEMS/NEMS), Jeju, Korea (September 17-20, 2023)
  15. J. Ko, J. Lee, “Hyper-multimodal measurements with heater-integrated fluidic resonators to analyze quaternary liquid mixtures”, The 14th Japan-China-Korea Joint Conference on MEMS/NEMS (JCK MEMS/NEMS), Jeju, Korea (September 17-20, 2023)
  16. J. Ko, H. Son, S. Lee, G. H. Kim, and J. Lee, “Sub-skin Temperature Prediction from Skin Temperature Distribution for Frostbite-free Cryo-anesthesia”, The 22nd International Conference on Solid-State Sensors, Actuators and Microsystems, Kyoto, Japan (June 25-29, 2023)
  17. T. Kim and J. Lee, “Nanoscale Stencils Fabricated by Focused Ion Beam Milling and Dry Transfer of Silicon-on-Nothing Membranes”, The 22nd International Conference on Solid-State Sensors, Actuators and Microsystems, Kyoto, Japan (June 25-29, 2023)
  18. J. Ko and J. Lee, “Real-time viscosity measurement under temperature modulation by heater-integrated fluidic resonators”, The 18th International Conference on Nano/Micro Engineered and Molecular Systems, Jeju, Korea (May 14-17, 2023) (Best Oral Presentation Award).
  19. R. E. Adhawiyah, J. Ko and J. Lee, “Electroless gold deposition and 4-Mercaptopyridine modification onto the solid cantilever for mercury ion detection”, The 18th International Conference on Nano/Micro Engineered and Molecular Systems, Jeju, Korea (May 14-17, 2023)
  20. M. G. Jeong, J. Jeong, T. Kim, B. J. Lee and J. Lee, “Near-infrared inspection and machine learning based prediction for semiconductor membrane cavity structures”, The 18th International Conference on Nano/Micro Engineered and Molecular Systems, Jeju, Korea (May 14-17, 2023)
  21. T. Kim, J. Ko and J. Lee, “Top-down mass production of uniform silicon nanoparticles via high temperature annealing”, Spring conference of Korean Society of Mechanical Engineering – Micro/Nano division, Busan, Korea (May 10-12, 2023) (Outstanding Poster Presentation Award).
  22. T. Kim, M. Choi, B. J. Lee and J. Lee, “Fabrication of silicon-on-insulator structure via simultaneous internal and external oxidation of Silicon-on-Nothing (SON)”, The 25th Korean MEMS Conference, Jeju, Korea (Mar 22-24, 2023) (Best Oral Presentation Award).
  23. T. Kim and J. Lee, “Top-down fabrication of single crystal silicon nanoparticles based on shape evolution during high temperature annealing”, The 25th Korean MEMS Conference, Jeju, Korea (Mar 22-24, 2023).
  24. J. Ko, H. Son, S. Lee, G. Kim and J. Lee, “Subsurface temperature prediction by deep neural network with in-situ surface temperature measurement during skin cryo-anesthesia”, The 25th Korean MEMS Conference, Jeju, Korea (Mar 22-24, 2023).
  25. R. E. Adhawiyah and J. Lee, “Mercury ion detection using 4-Mercaptopyridine-functionalized gold film by electroless deposition method”, The 25th Korean MEMS Conference, Jeju, Korea (Mar 22-24, 2023).
  26. N. B. Fredj and J. Lee, “4D printed thermal-responsive soft actuators based on sequential stimulus mechanism”, The 25th Korean MEMS Conference, Jeju, Korea (Mar 22-24, 2023).
  27. J. Ko, B. Lee, and J. Lee, “Advanced thermophysical properties measurements using heater-integrated fluidic resonators”, The 36th International Conference on Micro Electro Mechanical Systems, Munich, Germany (January 19, 2023) Best Oral Presentation Award Finalists).
  28. M. G. Jeong, T. Kim, J. Jeong, J. Lee, “반도체 박막-공동 구조체를 위한 비파괴 검사 분석 및 해석”, 2022 Nanoscientific Symposium Korea, Daejeon, Korea (November 23, 2022) (Invited).
  29. J. Jeong, T. Kim, J. Lee, “Simulation of Germanium-on-Nothing cavity’s morphological transformation using deep learning”, 2022 Fall conference of Micro Nano Systems, Gwangju, Korea (November 17~18, 2022).
  30. J. Ko, J. Lee, “Uncertainty analysis for fast and synchronized multimodal measurements using a microscope heater-integrated fluidic resonator”, 2022 Fall conference of Micro Nano Systems, Gwangju, Korea (November 17~18, 2022).
  31. T. Kim, J. Lee, “Top-down fabrication of single crystal silicon nanoparticles”, 2022 Fall conference of Micro Nano Systems, Gwangju, Korea (November 17~18, 2022).
  32. J. Song, M. Choi, J. Lee, B. Lee, “다중접합 광전지셀과 그래파이트 중간구조를 이용한 근접장 태양 열광전지 에너지 변환 시스템”, 2022 Fall conference of Korean Society of Mechanical Engineering, Jeju, Korea (November 9~11, 2022).
  33. T. Kim, J. Lee, “나노스케일 금속 패턴 구현을 위한 단결정 실리콘 박막 쉐도우 마스크”, 2022 Fall conference of Korean Society of Mechanical Engineering, Jeju, Korea (November 9~11, 2022).
  34. J. Jeong, J. Shim, J. Lee, Y. Nam, “다양한 젖음성 표면의 액적 응축 현상에 대한 컴퓨터 비젼 기반 분석”, 2022 Fall conference of Korean Society of Mechanical Engineering, Jeju, Korea (November 9~11, 2022).
  35. J. Ko, B. Lee, J. Lee, “가열 소자 통합 채널 공진기의 액체 열물성 측정 성능 개선을 위한 진공 환경 구동”, 2022 Fall conference of Korean Society of Mechanical Engineering, Jeju, Korea (November 9~11, 2022).
  36. J. Lee, “Microchannel cantilevers beyond mass sensing applications”, The 13th Japan-China-Korea Joint Conference on MEMS/NEMS, 2022, Kagoshima, Japan, Hybrid (October 18, 2022) (Invited).
  37. J. Ko, B. Lee, J. Lee, “Vacuum operation of heated microchannel resonators for sensitivity enhancement upon thermophysical properties measurements”, 2022 Fall Conference of the Korean Sensors Society, Yeosu, Korea (August 24~26, 2022) (Best Presentation Award).
  38. J. Ko, B. Lee, J. Lee, “Heated fluidic resonators for thermophysical properties and phase transition measurements of ultrasmall liquid volume”, 18th International Workshop on Nanomechanical sensing (NMC2022), Bangalore, India (Hybrid) (August 9~12, 2022) (Best Online Poster Award).
  39. T. Kim, J. Lee, “Transfer of a monocrystalline silicon thin film on a flexible substrate”, Spring conference of Korean Society of Mechanical Engineering – Micro Nano division, Busan, Korea (April 18~20, 2022).
  40. J. Jeong, T. Kim, B. Lee, J. Lee, “Nanoscale topography prediction and simulation of Germanium-on-Nothing using deep learning”, Spring conference of Korean Society of Mechanical Engineering – Micro Nano division, Busan, Korea (April 18~20, 2022).
  41. J. Ko, B. Lee, J. Lee, “Integration of microchannel resonator and Raman spectroscopy for simultaneous measurement of density, viscosity, and mole fraction of binary mixtures”, Spring conference of Korean Society of Mechanical Engineering – Micro Nano division, Busan, Korea (April 18~20, 2022).
  42. D. Kim, S. Choi, J. Lee, B. Lee, “정상 상태 열반사법을 이용한 티타늄 박막의 면방향 열전도도 측정”, Spring conference of Korean Society of Mechanical Engineers – Thermal Engineering division, Gyeongju, Korea (April 20~22, 2022).
  43. J. Song, M. Choi, J. Lee, B. Lee, “Design and performance analysis of a near-field solar thermophotovoltaic energy conversion system”, Spring conference of Korean Society of Mechanical Engineers – Thermal Engineering division, Gyeongju, Korea (April 20~22, 2022).
  44. M. Choi, J. Lee, B. Lee, “Experimental characterization of environment and temperature dependent radiative cooling performance”, Spring conference of Korean Society of Mechanical Engineers – Thermal Engineering division, Gyeongju, Korea (April 20~22, 2022).
  45. J. Nam, J. Ko, J. Lee, B. Lee, “적외선 카메라를 이용한 히터 내장 캔틸레버의 온도 분포 측정”, Spring conference of Korean Society of Mechanical Engineers – Thermal Engineering division, Gyeongju, Korea (April 20~22, 2022).
  46. T. Kim, J. Lee, “고종횡비의 마이크로미터 및 서브 마이크로미터 실리콘 홀 어레이에 대한 deep reactive ion etching 최적화”, Annual conference of KMEMS, Jeju, Korea (Apr 6-8, 2022) (Best Paper Award).
  47. T. Kim, M. Jeong, B. Lee, J. Lee, “3D anti-counterfeiting tag encoding based on multi-layered silicon-on-Nothing structures and decoding with near-IR interferometry”, Annual conference of KMEMS, Jeju, Korea (Apr 6-8, 2022).
  48. J. Ko, Y. Nam, B. Lee, J. Lee, “Thermophysical properties and phase change measurements for ultrasmall volume liquids using heater integrated microchannel resonators”, Annual conference of KMEMS, Jeju, Korea (Apr 6-8, 2022).
  49. J. Jeong, B. Lee, J. Lee, “AFM topography prediction and classification for periodically patterned germanium samples using encoder-decoder transfer learning”, Annual conference of KMEMS, Jeju, Korea (Apr 6-8, 2022).
  50. M. Jeong, T. Kim, B. Lee, J. Lee, “Surrogate model for optimizing annealing duration of self-assembled membrane-cavity structures”, Annual conference of KMEMS, Jeju, Korea (Apr 6-8, 2022) (Best Paper Award).
  51. T. Kim, J. Ko, J. Lee, “High-vacuum pressure sensor with silicon-on-nothing (SON) membrane resonators”, Annual conference of KMEMS, Jeju, Korea (Apr 6-8, 2022).
  52. T. Kim, M. Jeong, B. Lee, J. Lee, “Fabrication of single and double-stacked germanium-on-nothing structure by near-melting temperature annealing”, Spring conference of Nano Convergence, Gwangju, Korea (Jan 18~19, 2022) (Best Oral Presentation Award).
  53. J. Ko, B. Lee, J. Lee, “Revealing thermophysical properties of 20 pL liquids using microchannel resonators with a built-in heater”, Spring conference of Nano Convergence, Gwangju, Korea (Jan 18~19, 2022).
  54. J. Jeong, T. Kim, B. Lee, J. Lee, “Encoder-decoder neural network and PCA-based surface inspection methodology for GON structures” Spring conference of Nano Convergence, Gwangju, Korea (Jan 18~19, 2022) (Best Poster Presentation Award).
  55. J. Ko, B. Lee, and J. Lee, “액체 밀도 및 분자 지문의 동시 측정 및 시료 구별 성능의 향상을 위한 공진 주파수 및 라만 측정 시스템의 통합”, Fall conference of Micro and Nano Systems, An-myeon Island, Korea (November 11~12, 2021).
  56. T. Kim, M. Jeong, B. Lee, and J. Lee, “고온 진공 어닐링을 이용한 자가조립 저매니움 단층 및 복층 공동 제작”, Fall conference of Micro and Nano Systems, An-myeon Island, Korea (November 11~12, 2021).
  57. J. Jeong, T. Kim, B. Lee, and J. Lee, “자가 조립 저마늄 구조를 위한 PCA 기반 표면 검사 및 분석 방법론”, Fall conference of Micro and Nano Systems, An-myeon Island, Korea (November 11~12, 2021) (Best Poster Presentation Award).
  58. J. Ko, B. Lee, and J. Lee, “Simultaneous measurement of mass density and mole fraction for sub-100 picoliter liquid binary mixture inside microchannel resonators”, Fall conference of Korean Society of Mechanical Engineers, Gwangju, Korea (November 3~5, 2021).
  59. T. Kim, M. Jeong, B. Lee, and J. Lee, “Fabrication of single and double germanium-on-nothing structures using high-temperature vacuum annealing of microscale hole arrays”, Fall conference of Korean Society of Mechanical Engineers, Gwangju, Korea (November 3~5, 2021).
  60. J. Jeong, T. Kim, B. Lee, and J. Lee, “PCA-based sub-surface analysis for Germanium-on-Nothing structures using nanoscale surface micrographs”, Fall conference of Korean Society of Mechanical Engineers, Gwangju, Korea (November 3~5, 2021).
  61. D. Kim, J. Lee, and B. Lee, “Characterization of thermal property of nanoscale aluminum thin film via steady-state thermoreflectance method”, Fall conference of Korean Society of Mechanical Engineers, Gwangju, Korea (November 3~5, 2021).
  62. M. Choi, J. Seo, J. Lee, and B. Lee, “Hexagonal array grating-patterned PDMS film for all-day radiative cooling system”, Fall conference of Korean Society of Mechanical Engineers, Gwangju, Korea (November 3~5, 2021).
  63. J. Seo, J. Chad, T. Paid, J. Lee, and B. Lee, “Temperature-dependent reflectometry of vanadium dioxide film in mid-infrared regime”, Fall conference of Korean Society of Mechanical Engineers, Gwangju, Korea (November 3~5, 2021).
  64. J. Nam, J. Ko, J. Lee, and B. Lee, “Precise temperature measurement of a micro-heater by high-resolution infrared thermometry”, Fall conference of Korean Society of Mechanical Engineers, Gwangju, Korea (November 3~5, 2021).
  65. S. Choi, D. Kim, J. Lee, and B. Lee, “Measurement of the out-of-plane thermal conductivity of thin titanium films using 3w method”, Fall conference of Korean Society of Mechanical Engineers, Gwangju, Korea (November 3~5, 2021).
  66. R. Abraham, Y. Yoon, F. Khan, S. Bukhara, T. Thundat, H. Chung, and J. Lee, “Measurement of thermophysical properties of liquid analyses using micro fluidic resonators via photo thermal modulation”, The 240th ECS Meeting, Orlando, FL, USA (online) (October 10, 2021) (Invited).
  67. J. Ko, S. Son, B. Lee, and J. Lee, “Fluidic resonators with integrated heating for various applications with fast and quantitative temperature modulation”, The 240th ECS Meeting, Orlando, FL, USA (online)  (October 10, 2021) (Invited).
  68. J. Ko, B. Lee, and J. Lee, “Thermal properties measurements of liquids using pulse operation with heater integrated microchannel resonators”, Spring conference of Korean Society of Mechanical Engineers – Thermal Engineering division, Jeju, Korea (May 26~28, 2021).
  69. T. Kim, J. Jeong, M. Jung, B. Lee, and J. Lee, “High-resolution image-based silicon and germanium self-assembly cavity transient analysis”, Spring conference of Korean Society of Mechanical Engineers – Thermal Engineering division, Jeju, Korea (May 26~28, 2021).
  70. S. Son, B. Lee, and J. Lee, “Boiling point measurements and phase change study using pressurizable and heatable metallic tube resonant sensors”, Spring conference of Korean Society of Mechanical Engineers – Micro/Nano division, Busan, Korea (May 26~28, 2021).
  71. J. Ko, B. Lee, and J. Lee, “Dynamic inertial imaging of heater integrated microchannel dispensers for real-time monitoring of bubble jet”, The 23rd Korean MEMS Conference, Buyeo, Korea (April 7, 2021).
  72. T. Kim, M. Jung, B. Lee, and J. Lee, “Transient self-assembled structure analysis for prediction of the cavity formation upon high temperature annealing”, The 23rd Korean MEMS Conference, Buyeo, Korea (April 7, 2021).
  73. J. Ko, B. Lee, and J. Lee, “Thermal properties measurements of liquids using pulse operation with heater integrated microchannel resonators”, The 23rd Korean MEMS Conference, Buyeo, Korea (April 7, 2021).
  74. T. Kim, B. Lee, and J. Lee, “Flexible liquid metal 3ω sensor fabricated by shear induced direct printing for thermal conductivity measurement of human skin”, 2020 Fall Conference of Korean Society of Mechanical Engineers (KSME), Jeongseon (Online), Korea (December 17, 2020).
  75. J. Ko, B. Lee, and J. Lee, “Real-time resonance frequency monitoring for microbubble nucleation and evolution inside heater integrated microchannel cantilever”, 2020 Fall Conference of Korean Society of Mechanical Engineers (KSME), Jeongseon (Online), Korea (December 17, 2020).
  76. J. Lee, “Physical Sensors based on hollow mechanical resonators”, 2020 Fall Conference of the Korean Sensors Society, Gangneung, Korea (November 12, 2020) (Invited).
  77. J. Song, J. Seo, S. Lee, J. Lee, and B. Lee, “Ultrahigh emissivity of grating-patterned PDMS film from 8 to 13 um wavelength regime”, The 22nd Korean MEMS Conference, Pyeongchang, Korea (August 21, 2020).
  78. J. Ko, B. Lee, and J. Lee, “Fabrication and characterization of high resolution suspended micro channel dispensers with an integrated heater”, The 22nd Korean MEMS Conference, Pyeongchang, Korea (August 21, 2020).
  79. S. Son, M. Kim, B. Lee, and J. Lee, “Structurally robust mechanical resonators for liquid density measurements with electric heating”, Spring conference of Korean Society of Mechanical Engineers – Micro/Nano division, Daejeon, Korea (July 29~31, 2020).
  80. D. Kim, T. Kim, J. Lee, and B. Lee, “Thermal conductivity measurement of liquid metal with 3-omega method”, The 2nd Pacific Rim Thermal Engineering Conference (PRTEC), Maui Island, Hawaii, USA (December 17, 2019).
  81. E. Lee, H. Kang, J. Lee, and B. Lee, “Thermal characterization of a BGA NVMe solid state drive in Mini-ITX system”, The 2nd Pacific Rim Thermal Engineering Conference (PRTEC), Maui Island, Hawaii, USA (December 17, 2019).
  82. J. Kim, T. Kim, H. Lee, J. Lee, and B. Lee, “Fabrication of liquid-metal nano-emulsion and characterization of its dispersion stability”, The 2nd Pacific Rim Thermal Engineering Conference (PRTEC), Maui Island, Hawaii, USA (December 16, 2019).
  83. J. Ko, B. Lee, and J. Lee, “Precision printing and microstructure fabrication using microcantilevers with fluidic channel and dispensing nozzles”, Fall conference of the Korean Society of Mechanical Engineers, Jeju Island, Korea (November 2019)
  84. T. Kim, D. Kim, B. Lee, and J. Lee, “Precision measurement of thermal conductivity of artificial skin with liquid metal sensor fabricated by microcontact printing”, Fall conference of the Korean Society of Mechanical Engineers, Jeju Island, Korea (November 2019)
  85. J. Lee, “Fluidic channel integrated resonators for liquid and particle sensing”, Asia-Pacific Thermofluid Science and Engineering Conference (APTSE) 2019, Taipei, Taiwan (November 1, 2019) (Invited).
  86. J. Lee, F. Khan, T. Thundat, and J. Lee, “Dual channel microfluidic resonators for simultaneous measurements of liquid analytes”, The 17th International Nanotech Symposium and Exhibition (NANO KOREA 2019), Ilsan, Korea (July 5, 2019).
  87. J. Ko, D. Lee, S. Kauh, and J. Lee, “Pulled glass pipette resonators enabling mass measurements for selectively aspirated microscale objects”, The 17th International Nanotech Symposium and Exhibition (NANO KOREA 2019), Ilsan, Korea (July 5, 2019).
  88. T. Kim, B. Lee, and J. Lee, “Investigation of mechanical properties of liquid metal patterns on a substrate using scanning probe microscopy”, The 17th International Nanotech Symposium and Exhibition (NANO KOREA 2019), Ilsan, Korea (July 5, 2019).
  89. J. Ko, D. Lee, B. Lee, T. Kang, S. Kauh, and J. Lee, “Aspiration and mass measurements of microparticles and unicellular organisms via micropipette resonators”, The 20th International Conference on Solid-state Sensors, Actuators, and Microsystems, Berlin, Germany (June 27, 2019).
  90. J. Lee, F. Khan, T. Thundat,  and J. Lee, “Dual channel microfluidic resonators for simultaneous measurements of liquid analytes”, The 20th International Conference on Solid-state Sensors, Actuators, and Microsystems, Berlin, Germany (June 26, 2019).
  91. J. Lee, “Fluidic channel integrated resonators via traditional microfabrication and unconventional fabrication”, The 16th International Workshop on Nanomechanical Sensing (NMC2019), Lausanne, Switzerland (June 20, 2019) (Invited).
  92. J. Ko, D. Lee, S. Kauh, and J. Lee, “Development of micropipette resonators for selective mass measurement”, Spring conference of Korean Society of Mechanical Engineers – Micro/Nano division, Busan, Korea (May 24, 2019).
  93. T. Kim, B. Lee, and J. Lee, “Characterization of mechanical and electrical properties of liquid metal patterns by scanning probe microscopy”, Spring conference of Korean Society of Mechanical Engineers – Micro/Nano division, Busan, Korea (May 24, 2019).
  94. J. Lee, “Fluidic channel integrated resonators via traditional microfabrication and unconventional fabrication”, 2019 KPS Spring Meeting, Daejeon, Korea (April 24, 2019) (Invited).
  95. J. Ko, D. Lee, S. Kauh, and J. Lee, “Selective aspiration and in-situ mass measurement for microparticles and unicellular Organisms by micropipette resonators”, The 21st Korean MEMS Conference, Jeju Island, Korea (April 6, 2019).
  96. J. Lee, T. Kim, F. Khan, T. Thundat, B. J. Lee, and J. Lee, “Dual channel microfluidic resonators for simultaneous measurements of liquid analytes”, The 21st Korean MEMS Conference, Jeju Island, Korea (April 5, 2019).
  97. J. Ko, A. Jarzembski, Y. Yoon, K. Park, B. Lee, and J. Lee, “Modifying quartz tuning forks for shear force microscopy and humidity sensing”, The 32nd International Conference on Micro Electro Mechanical Systems, Seoul, Korea (January 30, 2019) Open poster.
  98. Y. Yoon, F. Khan, T. Thundat, and J. Lee, “Thermal characterization of liquid analytes via photothermal modulation of microfluidic resonators”, The 32nd International Conference on Micro Electro Mechanical Systems, Seoul, Korea (January 28, 2019).
  99. J. Lee, “High-performance mechanical transducers via unconventional materials and fabrication”, Nano Convergence Conference (NCC) 2019, Korea (January 17, 2019) (Invited).
  100. J. Rho, J. Lee, and B. Lee, “Thermal response of Si AFM cantilever for achieving AFM-Thermoreflectance thermometry”, Nanoscale and Microscale Heat Transfer VI, Eurotherm seminar No. 111, Levi, Lapland, Finland, December 2018.
  101. T. Thundat, F. Khan, S. Chaudhari, K. Chaudhari, S. Kim, and J. Lee, “Microfluidic cantilever biosensors”, 2018 IEEE Sensors, New Delhi, India, October 2018.
  102. J. Lee, Y. Yoon, B. Lee, and J. Ko, “Polymeric atomic force microscope cantilevers fabricated in elastomeric molds via ultraviolet curing”, Emerging Technologies in Mechanical Engineering 2018, Jeju Island, Korea, August 2018.

Before joining KAIST

  1. D. Wong, A. Sandwell, J. Ko, J. Lee, and S. S. Park, “Multi-modal quartz tuning fork with electrospun nanofiber for hydrogen gas sensing”, The 15th International Workshop on Nanomechanical Sensing, Incheon, Korea, June 2018.
  2. J. Ko, D. Yang, A. Jarzembski, K. Park, W. Ryu, and J. Lee, “Polymer tip attached quartz tuning forks for shear force atomic force microscopy”, The 15th International Workshop on Nanomechanical Sensing, Incheon, Korea, June 2018.
  3. Y. Yoon and J. Lee, “Resonant hair humidity sensors: Revisit the hair hydrometer”, The 15th International Workshop on Nanomechanical Sensing, Incheon, Korea, June 2018.
  4. R. Abraham, F. Khan, A. Alodhayb, Y. Yoon, J. Lee, and T. Thundat, “Charge transport mechanisms in liquids and polymers investigated using Lorentz force”, The 15th International Workshop on Nanomechanical Sensing, Incheon, Korea, June 2018.
  5. D. Jenson, J. Song, D. Kim, J. Lee, G. D. Bothun, A. Bose, and K. Park, “Modeling of hybrid silicon-on-nothing photonic crystal-nanoantenna structures for mid-infrared photonic-plasmonic coupling”, The 15th International Workshop on Nanomechanical Sensing, Incheon, Korea, June 2018.
  6. B. Lee, Y. Yoon, S. Kim, and J. Lee, “Batch fabrication of polymer atomic force microscope cantilevers in PDMS microfluidic mold assembly”, The 15th International Workshop on Nanomechanical Sensing, Incheon, Korea, June 2018.
  7. Y. Yoon and J. Lee, “Hydrogel membrane resonators with metallic piezoresistors deposited through hydrogel shadow mask”, The 15th International Workshop on Nanomechanical Sensing, Incheon, Korea, June 2018.
  8. Y. Yoon, D. Kim, J. Kim, and J. Lee, “Pulled theta microcapillary tube resonators with injected liquid metal heater for thermophysical property measurements”, The 15th International Workshop on Nanomechanical Sensing, Incheon, Korea, June 2018 (Best Poster Award).
  9. D. Lee, G. Shin, Y. Yoon, S. Kauh, and J. Lee, “Asymmetric microtube resonators for weighing microparticles when two resonance motion occurs”, The 15th International Workshop on Nanomechanical Sensing, Incheon, Korea, June 2018.
  10. J. Kim, Y. Kang, Y. Yoon, F. Khan, and J. Lee, “Cost-effective educational vibrometer for static and dynamic measurement of MEMS resonators”, The 15th International Workshop on Nanomechanical Sensing, Incheon, Korea, June 2018.
  11. B. Lee, Y. Yoon, and J. Lee, “Batch fabrication of photocurable polymeric atomic force microscope cantilevers in microfluidic mold assembly”, Spring conference of the Korean Society of Mechanical Engineers – Micro/Nano division, Busan, Korea, May 2018 (Best Poster Award).
  12. J. Ko and J. Lee, “Comparative scanning tunneling microscopy using electrochemically etched tungsten and hand-cut platinum-iridium tips”, Spring conference of the Korean Society of Mechanical Engineers – Micro/Nano division, Busan, Korea, May 2018.
  13. J. Lee, Y. Yoon, Bora Lee, and J. Ko, “Microfluidic fabrication approach for atomic force microscope cantilevers with UV curable polymers”, Spring conference of the Korean Society of Mechanical Engineers – Micro/Nano division, Busan, Korea, May 2018.
  14. T. Thundat, R. Abraham, F. Khan, S. Kim, and J. Lee, “Time-of-flow micromechanical mass spectrometry and micromechanical infrared spectroscopy using microfluidic cantilever”, ECS Meeting, May 2018.
  15. Y. Yoon, D. Kim, J. Kim, and J. Lee, “Pulled theta capillary tube resonator with liquid metal heater for thermomechanical analysis”, Spring conference of the Korean Society of Mechanical Engineers – Micro/Nano division, Busan, Korea, May 2018.
  16. J. Lee, Y. Yoon, B. Lee, and J. Ko, “Polymeric atomic force microscope cantilevers fabricated via replica molding and ultraviolet curing”, The 20th International Scanning Probe Microscopy Conference, Arizona, USA, May 2018.
  17. Y. Yoon and J. Lee, “Free standing hydrogel microstructures for MEMS sensing platforms”, The 20th Korean MEMS Conference, Jeju Island, Korea, April 2018.
  18. Y. Yoon, D. Kim, and J. Lee, “Pulled theta capillary tube resonator with liquid metal heater for thermal sensing application”, The 20th Korean MEMS Conference, Jeju Island, Korea, April 2018.
  19. D. Kim, Y. Yoon, S. Kauh, and J. Lee, “High-resolution liquid metal patterning via phase change of liquid metal and elastic deformation of flexible substrates”, The 20th Korean MEMS Conference, Jeju Island, Korea, April 2018.
  20. D. Kim, Y. Yoon, S. Kauh, and J. Lee, “Towards sub-microscale liquid metal patterns: Cascade phase change mediated PICK-n-PLACE transfer of liquid metals printed and stretched over a flexible substrate”, The 31st IEEE MEMS, Belfast, UK, January 2018.
  21. J. Ko, A. Jarzembski, K. Park, and J. Lee, “Hydrogel tip attached quartz tuning fork using elastomeric tip mold replicated from electrochemically etched tungsten wire”, The 31st IEEE MEMS, Belfast, UK, January 2018.
  22. B. Lee, Y. Yoon, and J. Lee, “Microfluidic fabrication approach for atomic force microscope cantilevers with photocurable resins”, The 31st IEEE MEMS, Belfast, UK, January 2018.
  23. J. Lee, “Hydrogel microelectromechanical systems”, The 4th International Conference on Advanced Electromaterials, Jeju Island, Korea, November 2017 (Invited).
  24. J. Lee, B. Lee, J. Ko, and Y. Yoon, “Unconventional micro-/nanofabrication materials and processes”, The 30th International Microprocesses and Nanotechnology Conference (MNC 2017), Jeju Island, Korea, November 2017 (Invited).
  25. D. Kim, Y. Yoon, S. Kauh and J. Lee, “High-resolution liquid metal patterning via phase change of liquid metal and elastic deformation of flexible substrate”, Fall conference of the Korean Society of Mechanical Engineers, Jeju Island, Korea, November 2017.
  26. B. Lee, Y. Yoon, S. Kim, and J. Lee, “Rapid batch fabrication of atomic force microscope cantilevers with photocurable polymers using microfluidic PDMS mold assembly”, Fall conference of the Korean Society of Mechanical Engineers, Jeju Island, Korea, November 2017.
  27. J. Ko, Y. Yoon, B. Lee and J. Lee, “Quartz tuning forks with hydrogel printed by dynamic mask lithography for humidity sensing applications”, Fall conference of the Korean Society of Mechanical Engineers, Jeju Island, Korea, November 2017.
  28. Y. Yoon and J. Lee, “Hydrogel membrane resonators with thin metal film piezoresistors deposited through hydrogel shadow mask”, Fall conference of the Korean Society of Mechanical Engineers, Jeju Island, Korea, November 2017.
  29. Y. Yoon, S. Kim, B. Lee, J. Ko, and J. Lee, “Stepping away from traditional micro-/nanofabrication”, The 7th Canada-Korea Conference on Science and Technology, Montreal, Canada, August 2017 (Keynote presentation).
  30. Y. Yoon, B. Lee, S. Kim, and J. Lee, “Hydrogel microeletromechanical systems (MEMS) resonators for pressure and humidity sensing applications”, The 15th International Nanotech Symposium (NANO KOREA 2017), July 2017 (Best Poster Award). 
  31. J. Ko, S. Kim, Y. Yoon, and J. Lee, “Hydrogel tip attached quartz tuning fork by using a mold fabricated from an electrochemically etched tungsten wire”, The 15th International Nanotech Symposium (NANO KOREA 2017), July 2017 (Best Poster Award). 
  32. J. Lee, B. Lee, S. Kwon, Y. Yoon, S. Kim, and J. Lee, “Sharpness improved hydrogel atomic force microscope cantilevers via wettability enhanced silicon tip mold by metal deposition”, The 15th International Nanotech Symposium (NANO KOREA 2017), July 2017 (Best Poster Award). 
  33. Y. Yoon, S. Kim, B. Lee, T. Thundat, and J. Lee, “Revisit the human hair hygrometer by making hair resonators”, The 10th International Symposium on Nature-Inspired Technology, Cebu, Philippine, June 2017.
  34. S. Kim, B. Lee, Y. Yoon, T. Thundat, and J. Lee, “Static and dynamic operation of metal-coated hydrogel cantilever humidity sensors based on hygroscopic mismatch”, The 19th International Conference on Solid-State Sensors, Actuators and Microsystems, Kaohsiung, Taiwan, June 2017.
  35. Y. Yoon, S. Kim, and J. Lee, “Fabrication and characterization of hydrogel MEMS resonators via dynamic mask lithography”, The 19th International Conference on Solid-State Sensors, Actuators and Microsystems, Kaohsiung, Taiwan, June 2017.
  36. Y. Yoon and J. Lee, “Fabrication and characterization of hydrogel membrane pressure sensors”, Spring conference of the Korean Society of Mechanical Engineers – Micro/nano division, Busan, Korea, May 2017.
  37.  J. Lee, S. Kwon, B. Lee and J. Lee, “Sharpness improvement of hydrogel atomic force microscope tip by metal deposited silicon tip replica mold”, Spring conference of the Korean Society of Mechanical Engineers – Micro/nano division, Busan, Korea, May 2017.
  38. B. Lee, S. Kim, Y. Yoon and J. Lee, “Metal-hydrogel composite microcantilever humidity sensors fabricated by dynamic mask lithography”, Spring conference of the Korean Society of Mechanical Engineers – Micro/nano division, Busan, Korea, May 2017.
  39. J. Ko, S. Kim, Y. Yoon and J. Lee, “Hydrogel tip attached quartz tuning fork by using a mold fabricated from electrochemically etched tungsten wire”, Spring conference of the Korean Society of Mechanical Engineers – Micro/nano division, Busan, Korea, May 2017.
  40. Y. Yoon, B. Lee, S. Kim, and J. Lee, “Fabrication and characterization of hydrogel MEMS resonators via dynamic mask lithography”, The 14th International Workshop on Nanomechanical Sensing, Hawaii, USA, April 2017.
  41. S. Kim and J. Lee, “Wear mechanisms and facile regeneration of hydrogel nano-probes for amplitude modulation atomic force microscopy”, The 14th International Workshop on Nanomechanical Sensing, Hawaii, USA, April 2017.
  42. Y. Yoon, S. Kim, and J. Lee, “Hydrogel microelectromechanical systems (MEMS) resonators via dynamic mask lithography and dry state sacrificial process”, The 19th Korean MEMS Conference, Jeju Island, Korea, April 2017.
  43. B. Lee, S. Kim and J. Lee, “Humidity sensing based on hygroscopic mismatch of metal-hydrogel composite microcantilevers”, The 19th Korean MEMS Conference, Jeju Island, Korea, April 2017.
  44. S. Kim and J. Lee, “Hydrogel-silicon hybrid cantilevers for studying wear characteristics and regeneration of soft imaging tips toward amplitude-modulation atomic force microscopy”, The 19th Korean MEMS Conference, Jeju Island, Korea, April 2017.
  45. S. Kim, J. Song, and J. Lee, “Facile fabrication of multiple hydrogel atomic force microscope cantilevers via capillary filling and ultraviolet curing in an alignment PDMS mold pair”, The 30th IEEE MEMS, Las Vegas, USA, January 2017.
  46. D. Lee, S. Kauh, and J. Lee, “Pulled microcapillary tube resonators for high precision microdroplet size measurements”, The 30th IEEE MEMS, Las Vegas, USA, January 2017.
  47. S. Kim, Y. Yoon, and J. Lee, “Direct assembly of a hydrogel nano-tip onto silicon microcantilevers for wear study and facile regeneration of soft atomic force microscope probes”, The 30th IEEE MEMS, Las Vegas, USA, January 2017 (Nominated as one of 12 outstanding student paper award finalists). 
  48. S. Kim, S. Cho, and J. Lee, “Can hydrogel AFM cantilevers outperform silicon counterparts?”, The 4th Kanazawa Bio-AFM Workshop, Kanazawa, Japan, October 2016.
  49. S. Kim, J. Song, and J. Lee, “Hollow nanomechanical resonant mass sensors via unconventional silicon self-assembly”, The 14th International Nanotech Symposium (NANO KOREA 2016), July 2016 (Best Poster Award with Silver Medal). 
  50. D. Lee, J. Kim, N. Cho, S. Kauh, and J. Lee, “Microcapillary mass sensors with electrical readout via quartz tuning fork”, The 13th International Workshop on Nanomechanical Sensing, Delft, Netherlands, June 2016.
  51. S. Kim and J. Lee, “Wear characteristics of hydrogel atomic force microscope probes under dynamic mode imaging”, Spring conference of the Korean Society of Mechanical Engineers – Micro/nano division, Busan, Korea, May 2016.
  52. D. Lee, S. Kauh, and J. Lee, “Harnessing electrical readout for microcapillary tube string resonators with quartz tuning forks”, Spring conference of the Korean Society of Mechanical Engineers – Micro/nano division, Busan, Korea, May 2016.
  53. J. Song, S. Kim, and J. Lee, “Development of fabrication processes for nanochannel resonators towards high resolution mass sensing applications in liquids”, The 18th Korean MEMS Conference, Jeju Island, Korea, April 2016.
  54. J. Lee, J. Song, and J. Lee, “Nanotribological and wear characteristics of hydrogel nanotips and facile regeneration for atomic force microscope applications”, The 18th Korean MEMS Conference, Jeju Island, Korea, April 2016.
  55. K. Kim, J. Lee, T. Kim, W. Kim, and J. Lee, “Development of liquid metal mirror for optical-lever detection of transparent hydrogel atomic force microscope cantilevers”, The 18th Korean MEMS Conference, Jeju Island, Korea, April 2016.
  56. D. Lee, J. Kim, N. Cho, S. Kauh, and J. Lee, “Nanoliter level liquid density measurements using microtube resonance detection via quartz tuning fork”, The 18th Korean MEMS Conference, Jeju Island, Korea, April 2016.
  57. S. Kim, J. Lee, and J. Lee, “Effect of scan parameters on the tip wear and imaging quality of hydrogel atomic force microscope cantilevers using non-contact mode imaging”, The 18th Korean MEMS Conference, Jeju Island, Korea, April 2016 (Best Paper Award – Poster Session).
  58. J. Song, J. Je, and J. Lee, “Towards multiscale fluidic channel networks via internal oxidation and oxide etching based on self-assembled silicon-on-nothing structures”, The 29th IEEE MEMS, Shanghai, China, January 2016.
  59. I. Chae, F. Khan, J. Song, J. Lee, J. Lee, and T. Thundat, “Standoff infrared spectroscopy on energetic materials using hydrogel microcantilevers”, The 29th IEEE Conference on Micro Electro Mechanical Systems, Shanghai, China, January 2016.
  60. S. Kim and J. Lee, “Development of hyperelastically stretchable strain gauge based on liquid metals and platinum catalyzed silicone elastomers”, Fall conference of the Korean Society of Mechanical Engineers, Jeju Island, Korea, October 2015 (Best Paper Award).
  61. K. Kim, J. Lee, and J. Lee, “Liquid metal reflective coating for optical detection of transparent atomic force microscope cantilevers”, Fall conference of the Korean Society of Mechanical Engineers, Jeju Island, Korea, October 2015.
  62. S. Kim, and J. Lee, “Micro thermal sensor using fluorescent red-shift of quantum-dot encapsulated hydrogel probe”, Fall conference of the Korean Society of Mechanical Engineers, Jeju Island, Korea, October 2015.
  63. J. Song, J. Lee, and J. Lee, “Fabrication of sub-20nm hydrogel cantilever tip using oxygen plasma ashing for high-resolution imaging”, Fall conference of the Korean Society of Mechanical Engineers, Jeju Island, Korea, October 2015.
  64. J. Lee, J. Song, and J. Lee, “Nanotribogical and wear characteristics of hydrogel nanotips and facile regeneration”, Fall conference of the Korean Society of Mechanical Engineers, Jeju Island, Korea, October 2015.
  65. J. Kim, J. Je, J. Song, K. Kim, S. Kim, and J. Lee, “Novel wafer-batch fabrication strategy for microfluidic resonators”, The 5th Canada-Korea Conference on Science and Technology, Calgary, Canada, July 2015.
  66. J. Kim and J. Lee, “Novel wafer-level batch fabrication strategy for microfluidic resonators”, The 12th International Workshop on Nanomechanical Sensing, Auckland, New Zealand, July 2015.
  67. S. Kim, J. Choi, B. Choi, and J. Lee, “Hyper-elastically stretchable gauges based on liquid metals and platinum-catalyzed silicone elastomers”, The 18th International Conference on Solid-State Sensors, Actuators and Microsystems, Anchorage, USA June 2015.
  68. J. Lee, J. Je, J. Song, and K. Kim, “Novel wafer-level batch fabrication technique for microfluidic resonators”, Spring conference of the Korean Society of Mechanical Engineers – Micro/nano division, Busan, Korea, May 2015.
  69. J. Kim, J. Song, and J. Lee, “Microtube resonator for high resolution mass sensing in liquids”, The 17th Korean MEMS Conference, Jeju Island, Korea, April 2015.
  70. J. Choi, S. Kim, J. Kim, J. Lee, and B. Choi, “Development of hyperelastic strain gauges based on liquid metals and platinum catalyzed silicone elastomers”, The 17th Korean MEMS Conference, Jeju Island, Korea, April 2015 (Industrial Innovation Award).
  71. S. Kim, J. Kim, J. Lee, and B. Choi, “Development of custom atomic force microscope combined with digital mask lithography”, The 17th Korean MEMS Conference, Jeju Island, Korea, April 2015.
  72. J. Je and J. Lee, “Towards batch fabrication of nanochannels and suspended nanotubes based on silicon on nothing structures”, The 17th Korean MEMS Conference, Jeju Island, Korea, April 2015.
  73. J. Song and J. Lee, “Hydrogel microcantilever, a superior AFM cantilever for the exploration of biological phenomena in cellular level”, The 17th Korean MEMS Conference, Jeju Island, Korea, April 2015.
  74. J. Lee and J. Lee, “Shape, size and tip sharpness tuning of hydrogel microcantilevers via ultra-violet curing with elastomeric replica moulds”, The 17th Korean MEMS Conference, Jeju Island, Korea, April 2015.
  75. J. Kim and J. Lee, “Development of microfluidic resonators via silicon-on-nothing technique”, The 28th IEEE Conference on Micro Electro Mechanical Systems, Estoril, Portugal, January 2015.
  76. J. Lee, “Hydrogel microcantilevers for atomic force microscopy applications”, The 16th International Scanning Probe Microscopy Conference, Seoul, Korea, July 2014.
  77. J. Lee and I. Lee, “Development of hydrogel microcantilevers for localized material delivery applications”, The 11th International Workshop on Nanomechanical Sensing, Madrid, Spain, April 2014.
  78. J. Song and J. Lee, “Development of low stiffness hydrogel microcantilevers for high-precision stiffness measurements of biological samples”, The 16th Korean MEMS Conference, Jeju Island, Korea, April 2014.
  79. J. Kim and J. Lee, “Effects of XeF2 etch undercut on resonant characteristics of silicon dioxide microbridges”, The 16th Korean MEMS Conference, Jeju Island, Korea, April 2014.
  80. I. Lee and J. Lee, “Development of hydrogel microcantilevers for local functional material delivery”, The 16th Korean MEMS Conference, Jeju Island, Korea, April 2014.
  81. J. Je and J. Lee, “Development of liquid metal microheaters with reliable electrode configuration”, The 16th  Korean MEMS Conference, Jeju Island, Korea, April 2014.
  82. I. Lee and J. Lee, “Fabrication and characterization of all hydrogel cantilevers for atomic force microscopy applications”, The 27th IEEE Conference on Micro Electro Mechanical Systems, San Francisco, USA, January 2014.
  83. J. Je and J. Lee, “Fabrication and characterization of liquid metal microheaters”, Fall conference of the Korean Society of Mechanical Engineers, Kangwon, Korea, December 2013.
  84. I. Lee and J. Lee, “Fabrication of hydrogel atomic force microscope cantilevers using dynamic mask lithography”, Fall conference of the Korean Society of Mechanical Engineers, Kangwon, Korea, December 2013.
  85. W. Lee, J. Lee, and S. Kang, “Analysis of flow characteristics for viscosity sensing applications of suspended microchannel resonators”, Fall conference of the Korean Society of Mechanical Engineers, Kangwon, Korea, December 2013.
  86. I. Lee and J. Lee, “Highly uniform and controllable Micropatterning of a Hydrogel on microcantilever Sensors”, The 17th International Conference on Solid-State Sensors, Actuators and Microsystems, Barcelona, Spain, June 2013.
  87. J. Kim, B. J. Lee, W. P. King, and J. Lee, “Optical heating and temperature sensing of heated microcantilevers using two-wavelength thermoreflectance”, The 10th International Workshop on Nanomechanical Sensing, California, USA, May 2013.
  88. I. Lee and J. Lee, “One-step fabrication of hydrogel microcantilevers using dynamic mask photolithography”, The 10th International Workshop on Nanomechanical Sensing, California, USA, May 2013.
  89. D. Estrada, Z. Li, S. Dunham, G. Choi, N. Wang, Y. Meng, F. Lian, J. Lee, J. Zuo, W. P. King, J. A. Rogers, D. G. Cahill, and E. Pop, “Thermal anisotropy of layer-by-layer assembled graphene films”, 2013 MRS Spring Meeting, California, USA, April 2013.
  90. J. Kim, B. J. Lee, and J. Lee, “Thermal characterization of heated microcantilevers using two-wavelength laser thermoreflectance microscopy”, The 15th Korean MEMS Conference, Jeju, Korea, April 2013.
  91. I. Lee and J. Lee, “Highly controllable local patterning of a hydrogel on microcantilevers”, The 15th Korean MEMS Conference, Jeju, Korea, April 2013.
  92. J. Kim, S. Han, K. Park, B. J. Lee, W. P. King and J. Lee, “DC and AC electrothermal characterization of heated microcantilevers using scanning thermoreflectance microscopy”, The 26th IEEE Conference on Micro Electro Mechanical Systems, Taipei, Taiwan, January 2013.
  93. N. Palombo, T. Walsh, J. Lee, and K. Park, “IMECE2012-89642 Experimental study of enhancement and quenching of plasmon controlled fluorescence using quantum dot – plasmonic nanoparticle mixture in aqueous medium”, ASME International Mechanical Engineering Congress & Exposition, Houston, Texas, 2012.
  94. J. Kim and J. Lee, “DC and AC thermal characterization of heated microcantilevers using thermoreflectance microscopy”, Fall conference of the Korean Society of Mechanical Engineers, Changwon, Korea, November 2012.
  95. I. Lee and J. Lee, “Precision density and volume change measurements of ethanol-water binary mixtures using suspended microchannel resonators”, Fall conference of the Korean Society of Mechanical Engineers, Changwon, Korea, November 2012.
  96. I. Lee and J. Lee, “Measurement of mixing ratio and volume change of ethanol-water binary mixtures using suspended microchannel resonators”, The 11th IEEE SENSORS, Taipei, Taiwan, October 2012.
  97. I. Lee and J. Lee, “Quality factor and vibration amplitude based viscosity measurements using suspended microchannel resonators”, The 11th IEEE SENSORS, Taipei, Taiwan, October 2012.
  98. I. Lee and J. Lee, “Low volume and high precision viscosity measurement with suspended microchannel resonators”, The 9th International Workshop on Nanomechanical Sensing, Mumbai, India, June 2012.
  99. J. Kim, I. Lee and J. Lee, “Bimodal mass sensing using suspended microchannel resonators”, The 14th Korean MEMS Conference, Jeju, Korea, April 2012.
  100. I. Lee and J. Lee, “Measurement uncertainties in resonant characteristics of MEMS resonators”, The 14th  Korean MEMS Conference, Jeju, Korea, April 2012.
  101. J. Lee, G. Chen, W. Shen, K. Payer, T. Burg, W. Rodriguez, M. Toner, and S. Manalis, “Weighing nanoparticles and viruses using suspended nanochannel resonators”, The 24th IEEE Conference on Micro Electro Mechanical Systems, Cancun, Mexico, 2011.

Before joining Sogang University

  1. . Lee and S.R. Manalis, “Second eigenmode operation of suspended microchannel resonators for high precision flow through mass sensing”, Hilton Head Workshop 2010: A Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head Island, SC, 2010.
  2. Y. Liu, N. Privorotskaya, J. Lee, H. Zeng, J.A. Carlisle, A. Radadia, L. Millet, R. Bashir, and W.P. King, “Rapid thermal lysis of cells using silicon-diamond microcantilever heaters”, The 7th International Workshop on Nanomechanical Cantilevers, Banff, Canada, 2010.
  3. C. M. Spadaccini, E. V. Mukerjee, J. Lee, and W.P. King, “Rapid thermal analysis of energetic materials with microfabricated differential scanning calorimeters”, The 15th International Conference on Solid-State Sensors, Actuators, and Microsystems, Denver, CO, 2009.
  4. J. Lee, C. M. Spadaccini, E. V. Mukerjee, and W.P. King, “Suspended membrane single crystal silicon micro hotplate for differential scanning calorimetry”, The 22nd IEEE Conference on Micro Electro Mechanical Systems, Sorrento, Italy, 2009.
  5. K. Park, J. Lee, W. P. King, and R. Bhargava, “Femtogram-level spectroscopic analysis using functional self-cleaning scanning probe tips”, The 59th Annual Pittsburgh Conference and Exposition on Analytical Chemistry and Applied Spectroscopy, New Orleans, LA, 2008.
  6. J. Lee and W.P. King, “Heated atomic force microscope cantilevers for nanoscience and nanoengineering”, The 10th International scanning probe microscopy conference, Seattle, WA, 2008.
  7. D. Wang, T. Okada, R. Szoszkiewicz, S.C. Jones, M Lucas, J. Lee, W.P. King, S.R. Marder, E. Riedo, “Reversible nanoscale local wettability modifications by thermochemical nanolithography”, Materials Research Society Symposium, v. 1059, 2008.
  8. Y. Hua, C.L. Henderson, J. Lee, and W.P. King, “Nanolithography on crosslinked polymers using heated AFM cantilever probes”, The 51st International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication, Denver, CO, 2007.
  9. J. Lee and W.P. King, “Array of microcantilever heaters with integrated piezoresistors”, IEEE International Conference on Nanotechnology 2007, Hong Kong, 2007.
  10. J. Lee, F.T. Goericke, and W.P. King, “Temperature dependent mechanical properties of doped silicon microcantilevers”, The 14th International Conference on Solid-State Sensors, Actuators, and Microsystems, Lyon, France, 2007.
  11. K. Park, J. Lee, Z.M. Zhang, and W.P. King, “Nanotopographic imaging using heated microcantilever in tapping mode”, The 14th International Conference on Solid-State Sensors, Actuators, and Microsystems, Lyon, France, 2007.
  12. J. Lee, H. Hunter, F. T. Goericke, N. Naik, M.G. Allen, A. Glezer, and W.P. King, “IPACK2007-33291 Measurements of microjet cooling and phase change characteristics using microcantilever heaters”, The ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems, Vancouver, BC, 2007.
  13. J. Lee, T. Beechem, K. Park, Z.M. Zhang, S. Graham, and W.P. King, “Thermal and mechanical characterization and calibration of heated microcantilevers”, Hilton Head Workshop 2006: A Solid-State Sensors, Actuators, and Microsystems Workshop, Hilton Head Island, SC, 2006.
  14. J. Lee, K. Naeli, H. Hunter, J. Berg, T.L. Wright, C. Courcimault, N. Naik, M.G. Allen, O. Brand, A. Glezer, and W.P. King, “IMECE2005-81732 Micro-cantilever based metrology tool for flow characterization of liquid and gaseous micro/nanojets”, ASME International Mechanical Engineering Congress & Exposition, Orlando, FL, 2005.
  15. N. Naik, C. Courcimault, J. Berg, H. Hunter, J. Lee, K. Naeli, T. Wright, M.G. Allen, O. Brand, A. Glezer and W.P. King, “IMECE2005-81698 Fabrication and characterization of liquid and gaseous micro- and nanojets”, ASME International Mechanical Engineering Congress & Exposition, Orlando, FL, 2005.
  16. J. Lee, T.L. Wright, M.R. Abel, E.O. Sunden, A. Marchenkov, S. Graham, and W.P. King, “IPACK2005-73456 Characterization of heated atomic force microscope cantilevers in air and vacuum”, The ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems, San Francisco, CA, 2005.
  17. A. Hammiche, M. Reading, T.L. Wright, J. Lee, W.P. King, H.M. Pollock, and R. Shetty, “Nanothermal analysis (n-TA) and photothermal IR micro-spectroscopy (PTMS), at sub-250 nm spatial resolution”, STM 2005–The 13th International Conference on Scanning Tunneling Microscopy/Spectroscopy and Related Techniques, Sapporo, Japan, 2005.
  18. W.P. King, J. Lee, J. Berg, and A. Glezer, “Microcantilever measurements in microscale liquid jets”, 2004 Meeting of the American Physical Society, Division of Fluid Dynamics, Seattle, WA, 2004.