Journals (94)

Covers

After joining KAIST

  1. A. Danielak, J. Ko, A. Islam, D. B. Pedersen, and J. Lee, “Direct PEGDA-based pattern fabrication on a hydrophobic surface using vat-photopolymerization additive manufacturing”, under revision.
  2. M. Chung, J. Kim, C. Qin, J. Lee, and B. Lee*, “Synthesis of Therminol-graphite nanofluids and their photo-thermal conversion properties”, accepted in International Journal of Energy Research.
  3. C. Qin, J. Lee, and B. Lee*, “A A hybrid direct-absorption parabolic-trough solar collector combining both volumetric and surface absorption”, Applied Thermal Engineering, 185, 116333 (2021).
  4. M. Kim, J. Seo, S. Yoon, H. Lee, J. Lee, and B. Lee*, “Optimization and performance analysis of multilayer structure for daytime radiative cooling”, Journal of Quantitative Spectroscopy and Radiative Transfer, 260, 107475 (2021).
  5. D. Kim, J. Kim, J. Lee and B. Lee*, “Measurement of effective thermal conductivity of LaNi5 powder packed bed”, International Journal of Heat and Mass Transfer, 165, Part B, 120735 (2021).
  6. J. Lee*, F. Khan, T. Thundat, and B. Lee, “Microfluidic resonators with two parallel channels for independent sample loading and effective density tuning”, Micro and Nano Systems Letters, 8:16 (2020).
  7. J. Song, J. Seo, J. Han, J. Lee*, and B. Lee*, “Ultrahigh emissivity of grating-patterned PDMS film from 8 to 13 μm wavelength regime”, Applied Physics Letters, 117, 094101 (2020).
  8. M. Lim, J. Song, S. Lee, J. Lee, and B. Lee*, “Surface-plasmon-enhanced near-field radiative heat transfer between planar surfaces with a thin-film plasmonic coupler”, Physical Review Applied, 14, 014070 (2020).
  9. J. Seo, C. Qin, J. Lee, and B. Lee*, “Tailoring the spectral absorption coefficient of a blended plasmonic nanofluid using a customized genetic algorithm”, Scientific Reports, 10, 8891 (2020).
  10. C. Qin, Y. Guo, J. Seo, Y. Shuai, J. Lee, and B. Lee*, “Absorption characteristics of a metal-insulator-metal nanodisk for solar thermal applications”, Optics Express, 28(10), 15731 (2020).
  11. D. Wong, O. Abuzalat, J. Ko, J. Lee, S. Kim, and S. Park*, “Intense pulsed light treated near-field electrospun nanofiber on quartz tuning fork for multi-modal gas sensors”, ACS Applied Materials and Interfaces, 12(21), 24308-24318 (2020).
  12. J. Song, J. Jang, M. Lim, J. Lee, S. Lee, and B. Lee*, “Near-field electroluminescent refrigeration system consisting of two graphene schottky diodes”, Journal of Heat Transfer, 142, 072101 (2020).
  13. C. Qin, J. Kim, J. Lee, and B. Lee*, “Comparative analysis of direct-absorption parabolic-trough solar collectors considering concentric nano fluid segmentation”, International Journal of Energy Research,  44, 4015-4025 (2020).
  14. J. Ko, D. Lee, B. Lee, S. Kauh, and J. Lee*, “Micropipette resonator enabling targeted aspiration and mass measurement of single particles and cells”, ACS Sensors, 4(12), 3275-3282 (2019) (IF: 6.944). High resolution cover pdf can be downloaded here.

  15. J. Seo, P. Jung, M. Kim, S. Yang, I. Lee, J. Lee, H. Lee, and B. Lee*, “Design of a broadband solar thermal absorber using a deep neural network and experimental demonstration of its performance”, Scientific Reports, 9:15028 (2019).
  16. T. Kim, D. Kim, B. Lee*, and J. Lee*, “Soft and deformable sensors based on liquid metals”, Sensors, 19(19) 10.3390/s19194250.
  17. K. Whang, J. Chang, K. Jung, H. Ko, J. Lee, I. Choi, and T. Kang*, “Optical detection of small metabolites for biological gas conversion by using metal nanoparticle monolayers produced by capillary-assisted transfer”, Analytical Chemistry, 91(20), 13152-13157 (2019).
  18. J. Je, J. Song, B. Lee, and J. Lee*, “Multiscale fluidic channels via internal oxidation and oxide etching of self-assembled silicon-on-nothing structures”, Journal of Microelectromechanical Systems,  28(5), 865-868 (2019).
  19. B. Lee and J. Lee*, “Beyond mass measurement for single microparticles via bimodal operation of microchannel resonators”, Micro and Nano Systems Letters, 7:9 (2019).
  20. Y. Yoon, T. Thundat, and J. Lee*, “Resonant hair humidity sensors for disposable applications: Revisit the hair hygrometer”, Sensors and Actuators: B-Chemical, 292, 1-6 (2019). 
  21. D. Estrada*, Z. Li, G. Choi, S. N. Dunham, A. Y. Serov, J. Lee, Y. Meng, F. Lian, N. C. Wang, A. Perez, R. T. Haasch, J. Zuo, W. P. King, J. A. Rogers, D. G. Cahill, and E. Pop*, “Thermal transport in layer-by-layer assembled polycrystalline graphene films”, npj 2D Materials and Applications, DOI:10.1038/s41699-019-0092-8 (2019).
  22. Y. Yoon, I. Chae, T. Thundat, and J. Lee*, “Hydrogel MEMS resonators: Beyond cost-effective sensing platform”, Advanced Materials Technologies, 1800597 (2019). High resolution cover pdf can be downloaded here.
  23. J. Ko, A. Jarzembski, K. Park, and J. Lee*, “Hydrogel tip attached quartz tuning fork for shear force microscopy”, Micro and Nano Systems Letters, 8:6 (2018).
  24. Y. Yoon, S. Kang, D. Kim, S. Kauh*, and J. Lee*, “Four degrees-of-freedom direct writing of liquid metal patterns on uneven surfaces”, Advanced Materials Technologies, 1800379 (2018). High resolution cover pdf can be downloaded here.

Before joining KAIST

  1. Y. Shin, K. Whang, J. Chang, J. Jang, S. Yoo, J. Lee, Y. Choi, I. Choi, and T. Kang*, “Three-dimensional assembly of metal nanoparticles @ liquid interface via their autonomous and rapid interfacial locomotion”, Advanced Materials Interfaces, 1800981 (2018). 

  2. J. Ko, Y. Yoon, and J. Lee*, “Quartz tuning forks with hydrogel patterned by dynamic mask lithography for humidity sensing”, Sensors and Actuators: B-Chemical, 273, 821-825 (2018).
  3. D. Kim, Y. Yoon, S. Kauh*, and J. Lee*, “Towards sub-microscale liquid metal patterns: Cascade phase change mediated PICK-n-PLACE transfer of liquid metals printed and stretched over a flexible substrate”, Advanced Functional Materials, 28(28), 1800380 (2018). High resolution cover pdf can be downloaded here.
  4. J. Liu*, M. Miao, K. Jiang, F. Khan, A. Goswami, R. McGee, Z. Li, L. Nguyen, Z. Hu, J. Lee, K. Cadien, and T. Thundat*, “Sustained electron tunneling at unbiased metal-insulator-semiconductor triboelectric contacts”, Nano Energy, 48, p. 320-326 (2018).
  5. D. Jensen, J. Song, D. Kim, J. Lee, G.D. Bothun, A. Bose, and K. Park*, “Design analysis of hybrid silicon-on-nothing photonic crystal-nanoantenna structures for engineering of mid-infrared radiative properties”, Journal of Nanophotonics, 12(2), 026005 (2018).
  6. J. Lee, D. Kim, Y. Yoon, B. Lee, J. Ko, and J. Lee*, “Hydrogel tip Integration onto tipless silicon cantilevers for atomic force microscopy and its facile regeneration”, Journal of Microelectromechanical Systems, 27(2), p. 125-126 (2018).
  7. J. Liu*, A. Goswami, K. Jiang, F. Khan, S. Kim, R. McGee, Z. Li, Z. Hu, J. Lee, and T. Thundat*, “Direct-current triboelectricity generation by a sliding Schottky nanocontact on MoS2 multilayers”, Nature Nanotechnology, 13, p. 112-116 (2018).
  8. L. Zhang, W. Zheng, H. Lee, J. Lee, L. Wu, and D. Kim*, “A study of morphological evolution of silicon micro-structure based on phase field model”, Ferroelectrics, 520, p. 154-158 (2017).
  9. T. Kim, K. Kim, S. Kim, J. Lee, and W. Kim*, “Micropatterning of liquid metal by dewetting”, Journal of Microelectromechanical Systems, 26(6), p. 1244-1247 (2017).
  10. H. Park, K. Whang, Y. Shin, J. Lee, and T. Kang*,“Synthesis of colloidal plasmonic microspheres via spontaneous formation and three-dimensional assembly of metal nanoparticles”, Korean Journal of Chemical Engineering, 34(7), p. 2086-2091 (2017).
  11. S. Chaudhari, K. Chaudhari, S. Kim, F. Khan, J. Lee*, and T. Thundat*, “Electrophoresis assisted time-of-flow mass spectrometry using hollow nanomechanical resonators”, Scientific Reports, 7, 3535 (2017).
  12. S. Kim, J. Song, S. Cho, and J. Lee*, “Facile batch fabrication of hydrogel atomic force microscope cantilevers via capillary filling and ultraviolet curing in an aligned elastomeric mold pair”, Journal of Microelectromechanical Systems, 26(3), p. 504-506 (2017).
  13. D. V. Ponnuvelu, S. Kim, and J. Lee*, “Polyethyleneglycol diacrylate hydrogels with plasmonic gold nanospheres incorporated via functional group optimization”, Micro Nano Systems Letters, 5(21) (2017).
  14. D. Lee, J. Kim, N. Cho, T. Kang, S. Kauh, and J. Lee*, “Pulled microcapillary tube resonators with electrical readout for mass sensing applications”, Scientific Reports, 6, 33799 (2016).
  15. K. Kim, S. Kim, T. Kim, W. Kim, and J. Lee*, “Spray-coated liquid metal reflectors for transparent hydrogel atomic force microscope cantilevers”, Journal of Microelectromechanical Systems, 25(5), p. 848-850 (2016).
  16. I. Chae, M. F. Khan, J. Song, T. Kang, J. Lee*, and T. Thundat*, “Standoff mechanical resonance spectroscopy based on infrared-sensitive hydrogel microcantilevers”, Analytical Chemistry, 88(19), p. 9678-9684 (2016).
  17. S. Kim, J. Lee*, and B. Choi*, “3D printed fluidic valves for remote operation via external magnetic field”, International Journal of Precision Engineering and Manufacturing, 17(7), p. 937-942 (2016).
  18. M. F. Khan, N. Miriyal, J. Lee, M. Hassanpourfard, A. Kumar, and T. Thundat*, “Rapid heat capacity measurements of sub-nanoliter liquids using biomaterial microchannel cantilevers”, Applied Physics Letters, 108, 211906 (2016).
  19. J. Lee, J. Song, S. Kim, S. Kim, W. Lee, J. Jackman, D. Kim, N. Cho*, and J. Lee*, “Multifunctional hydrogel nano-probes for atomic force microscopy”, Nature Communications 7, 11566 (2016). 
  20. S. Hamian, A. M. Gauffreau, T. Walsh, J. Lee, and K. Park*, “AC electrothermal characterization of doped-Si heated microcantilevers using frequency-domain finite element analysis”, Journal of Heat Transfer, 138(5), 052401 (2016).
  21. J. Kim, J. Song, K. Kim, S. Kim, J. Song, N. Kim, M. F. Khan, L. Zhang, J. E. Sader, K. Park, D. Kim, T. Thundat, and J. Lee*, “Hollow microtube resonators via silicon self-assembly toward subattogram mass sensing applications”, Nano Letters, 16(3), p. 1537-1545 (2016).
  22. S. Kim, J. Lee*, and B. Choi*, “Stretching and twisting sensing with liquid-metal strain gauges printed on silicone elastomers”, IEEE Sensors Journal, 15(11), p. 6077-6078 (2015).
  23. J. Choi, S. Kim, J. Lee*, and B. Choi*, “Improved capacitive pressure sensors based on liquid alloy and silicone elastomer”, IEEE Sensors Journal, 15(8), p. 4180-4181 (2015).
  24. T. Walsh, J. Lee, and K. Park*, “Laser-assisted photothermal heating of a plasmonic nanoparticle- suspended droplet in a microchannel”, Analyst, 140(5), p. 1535-1542 (2015).
  25. J. Je and J. Lee*, “Design, fabrication, and characterization of liquid metal microheaters”, Journal of Microelectromechanical Systems, 23(5) p. 1156-1163 (2014).
  26. D. Lee, M. Lee, N. Jung, M. Yun, J. Lee, T. Thundat, and S. Jeon*, “Modulus-tunable magnetorheological elastomer microcantilevers”, Smart Materials and Structures, 23, 055057 (2014).
  27. H. Park, B. Lee*, and J. Lee*, “Simultaneous determination of local temperature and thickness of heated cantilevers using two-wavelength thermoreflectance”, Review of Scientific Instruments, 85, 036109 (2014). Selected as Editor’s Picks from Review of scientific Instruments (2014.09).
  28. S. Olcum, N. Cermak, S. C. Wasserman, K. S. Christine, H. Atsumi, K. Payer, W. Shen, J. Lee, A. M. Belcher, S. N. Bhatia, and S. R. Manalis*, “Weighing nanoparticles in solution at the attogram scale”, Proceedings of the National Academy of Sciences of the United States of America, 111(4) p.1310-1315 (2014).
  29. M. Yun, I. Lee, S. Jeon*, and J. Lee*, “Facile phase transition measurements for nanogram level liquid samples using suspended microchannel resonators”, IEEE Sensors Journal, 14(3) p.781-785 (2014).
  30. M. Yang, J. Choi, J. Lee, N. Hur, and D. Kim*, “Wet blasting as a deburring process for aluminum”, Journal of Materials Processing Technology, 214(3), p.524-530 (2014).
  31. I. Lee and J. Lee*, “Highly uniform and controllable micropatterning of a hydrogel on microcantilevers”, Journal of Mechanical Science and Technology, 27(11) p.3439-3444 (2013).
  32. J. Kim, J. Lee*, and B. Choi*, “Fabrication and characterization of strain gauge integrated polymeric diaphragm pressure sensors”, International Journal of Precision Engineering and Manufacturing, 14(11) p.2003-2008 (2013).
  33. J. Kim, S. Han, T. Walsh, K. Park, B. Lee, W.P. King, and J. Lee*, “Temperature measurements of heated microcantilevers using scanning thermoreflectance microscopy”, Review of Scientific Instruments, 84, 034903 (2013).
  34. I. Lee and J. Lee*, “Measurement uncertainties in resonant characteristics of MEMS resonators”, Journal of Mechanical Science and Technology, 27(2), p.491-500 (2013).
  35. I. Lee, K. Park, and J. Lee*, “Precision density and volume contraction measurements of ethanol-water binary mixtures using suspended microchannel resonators”, Sensors and Actuators A, 194, p.62-66 (2013).
  36. J. Park, K. Kim, J. Lee, H. Kim, and D. Huh*, “Organomimetic microsystems technologies”, Biomedical Engineering Letters, 2, p.88-94 (2012).
  37. I. Lee, K. Park, and J. Lee*, “Precision viscosity measurement using suspended microchannel resonators”, Review of Scientific Instruments, 83, 116106 (2012).
  38. J. Lee*, B.J. Lee, and W.P. King, “Deflection sensitivity calibration of heated microcantilevers using pseudo-gratings”, IEEE Sensors Journal, 12(8), p.2666-2667 (2012).
  39. Y. Kwon, H. Lee, J. Lee*, and B. Choi*, “Vibration mode-dependent energy harvesting characteristics of magnetoelectric composite cantilevers”, IEEE Sensors Journal, 12(11), p.3271-3272 (2012).
  40. J.E. Sader*, T.P. Burg, J. Lee, and S.R. Manalis, “Energy dissipation in microfluidic beam resonators: Effect of Poisson’s ratio”, Physical Review E, 84, 026304 (2011).
  41. J. Lee, A.K. Bryan, and S.R. Manalis*, “High precision mass sensing using microchannel resonators in the second vibration mode”, Review of Scientific Instruments, 82, 023704 (2011). Republished online in the Virtual Journal of Nanoscale Science and Technology.
  42. J. Lee, R. Chunara, W. Shen, K. Payer, K. Babcock, T.P. Burg, and S.R. Manalis*, “Suspended microchannel resonators with piezoresistive sensors”, Lab on a Chip, 11, p.645-651 (2011).
  43. J.E. Sader*, J. Lee, and S.R. Manalis, “Energy dissipation in microfluidic beam resonators: Dependence on mode number”, Journal of Applied Physics, 108, 114507 (2010).

Before joining Sogang University

  1. J. Lee, W. Shen, K. Payer, T.P. Burg*, and S.R. Manalis*, “Toward attogram mass measurements in solution with suspended nanochannel resonators”, Nano Letters, 10(7), p.2537-2542 (2010). Highlighted in Nature Nanotechnology.
  2. N. Privorotskaya, Y. Liu, J. Lee, H. Zeng, J.A. Carlisle, A. Radadia, L. Millet, R. Bashir, and W.P. King*, “Rapid thermal lysis of cells using silicon-diamond microcantilever heaters”, Lab on a Chip, 10, p.1135-1141 (2010).
  3. J. Lee, A. Liao, E. Pop, and W.P. King*, “Electrical and thermal coupling to a single-wall carbon nanotube device using an electro-thermal nanoprobe”, Nano Letters, 9(4), p.1356-1361 (2009).
  4. O.A. Nafday, B.L. Weeks, W.P. King*, and J. Lee, “Inducing nanoscale morphology changes of pentaerythritol tetranitrate using a heated atomic force microscope cantilever”, Journal of Energetic Materials, 27(1), p.1-16 (2009).
  5. J. Lee, C. M. Spadaccini, E. V. Mukerjee, and W.P. King*, “Differential scanning calorimeter based on suspended membrane single crystal silicon micro hotplate”, Journal of Microelectromechanical Systems, 17(6), p.1513-1525 (2008).
  6. J. Lee and W.P. King*, “Liquid operation of silicon microcantilever heaters”, IEEE Sensors Journal, 8(11) p.1805-1806 (2008).
  7. A. Loui, F.T. Goericke, T.V. Ratto, J. Lee, B.R. Hart, and W.P. King*, “The effect of piezoresistive microcantilever geometry on cantilever sensitivity during surface stress chemical sensing”, Sensors and Actuators A, 147, p.516-521 (2008).
  8. W. Lee, L.J. Whitman, J. Lee, W.P. King, and P.E. Sheehan*, “The nanopatterning of a stimulus responsive polymer by thermal dip-pen nanolithography”, Soft Matter, 4, p.1844-1847 (2008).
  9. J. Lee, H. Hunter, A. Glezer, and W.P. King*, “Phase change and cooling characteristics of microjets measured using microcantilever heaters”, Sensors and Actuators A, 147, p.64-69 (2008).
  10. J. Lee, F. Goericke, and W.P. King*, “Temperature dependent thermomechanical noise spectra of doped silicon microcantilevers”, Sensors and Actuators A, 145-146, p.37-43 (2008).
  11. J. Lee and W.P. King*, “Microthermogravimetry using a microcantilever hotplate with integrated temperature compensated piezoresistive strain sensors”, Review of Scientific Instruments, 79, 054901 (2008). Republished online in the Virtual Journal of Nanoscale Science and Technology.
  12. K. Park, J. Lee, R. Bhargava, and W.P. King*, “Routine femtogram-level chemical analyses using vibrational spectroscopy and self-cleaning scanning probe microscopy tips”, Analytical Chemistry, 80, p.3211-3228 (2008).
  13. J. Lee and W.P. King*, “Improved all-silicon microcantilever heaters with integrated piezoresistive sensing”, Journal of Microelectromechanical Systems, 17(2), p.432-445 (2008).
  14. F. Goericke, J. Lee, and W.P. King*, “Microcantilever hotplates with temperature-compensated piezoresistive strain sensors”, Sensors and Actuators A, 143, p.181-190 (2008).
  15. J. Lee and W.P. King*, “Microcantilever actuation via periodic internal heating”, Review of Scientific Instruments, 78, 126102 (2007). Republished online in the Virtual Journal of Nanoscale Science and Technology. One of the 20 most downloaded articles from Review of Scientific Instruments during December 2007.
  16. D. Wang, R. Szoszkiewicz, M. Lucas, E. Riedo, T. Okada, S.C. Jones, S.R. Marder, J. Lee, and W.P. King*, “Local wettability modification by thermomechanical nanolithography”, Applied Physics Letters, 91, 243104 (2007). Republished online in the Virtual Journal of Nanoscale Science and Technology.
  17. J.L. Remmert, Y. Wu, J. Lee, M.A. Shannon, and W.P. King*, “Contact potential measurement using a heated atomic force microscope tip”, Applied Physics Letters, 91, 143111 (2007).
  18. K. Park, J. Lee, Z.M. Zhang, and W.P. King*, “Topography imaging with a heated atomic force microscope cantilever in tapping mode”, Review of Scientific Instruments, 78, 043709 (2007). Republished online in the Virtual Journal of Nanoscale Science and Technology.
  19. B.W. Chui, L. Aeschimann, T. Akiyama, U. Staufer, N.F. de Rooij, J. Lee, F. Goericke, W.P. King, and P. Vettiger, “Advanced temperature compensation for piezoresistive sensors based on crystallographic orientation”, Review of Scientific Instruments, 78, 043706 (2007). Republished online in the Virtual Journal of Nanoscale Science and Technology.
  20. K. Park, J. Lee, Z.M. Zhang, and W.P. King*, “Frequency-dependent electrical and thermal response of heated atomic force microscope cantilevers”, Journal of Microelectromechanical Systems, 16(2), p.213-222 (2007).
  21. J. Lee, T.L. Wright, M.R. Abel, E.O. Sunden, A. Marchenkov, S. Graham, and W.P. King*, “Thermal conduction from microcantilever heaters in partial vacuum”, Journal of Applied Physics, 101, 014906 (2007). Republished online in the Virtual Journal of Nanoscale Science and Technology.
  22. J. Lee and W.P. King*, “Microcantilever hotplates: Design, fabrication, and characterization”, Sensors and Actuators A, 136, p.291-298 (2007).
  23. K.J. Kim, K. Park, J. Lee, Z.M. Zhang, and W.P. King*, “Nanotopographical imaging using a heated atomic force microscope cantilever probe”, Sensors and Actuators A, 136, p.95-103 (2007).
  24. J. Lee, K. Naeli, H. Hunter, J. Berg, T.L. Wright, C. Courcimault, N. Naik, M.G. Allen, O. Brand, A. Glezer, and W.P. King*, “Characterization of liquid and gaseous micro- and nanojets using microcantilever sensors”, Sensors and Actuators A, 134, p.128-139 (2007).
  25. N. Naik, C. Courcimault, H. Hunter, J. Berg, J. Lee, K. Naeli, T.L. Wright, M.G. Allen, O. Brand, A. Glezer, and W.P. King*, “Microfluidics for generation and characterization of liquid and gaseous micro and nanojets”, Sensors and Actuators A, 134, p.119-127 (2007).
  26. A. Allen, A. Cannon, J. Lee, W.P. King, and S. Graham*, “Flexible microdevices based on carbon nanotubes”, Journal of Micromechanics and Microengineering, 16, p.2722-2729 (2006).
  27. J. Lee, T. Beechem, T.L. Wright, B.A. Nelson, S. Graham, and W.P. King*, “Electrical, thermal, and mechanical characterization of silicon microcantilever heaters”, Journal of Microelectromechanical Systems, 15(6), p.1644-1655 (2006).
  28. E.O. Sunden, T.L. Wright, J. Lee, W.P. King, and S. Graham*, “Room-temperature chemical vapor deposition and mass detection on a heated atomic force microscope cantilever”, Applied Physics Letters, 88, 033107 (2006). Republished online in the Virtual Journal of Nanoscale Science and Technology.